Lorex Technology FXV101 IP wireless camera User Manual (2022)

Lorex Technology FXV101 IP wireless camera User Manual (1)

DRAFT

Instruction Manual

FLIR FX

DRAFT

Lorex Technology FXV101 IP wireless camera User Manual (2)

DRAFT

Instruction Manual

FLIR FX

#LX400034; r.16787/16787; en-US iii

DRAFT

Lorex Technology FXV101 IP wireless camera User Manual (3)

DRAFT

Table of contents

1 Safety Precautions ..............................................................................1

2 What is included with my FLIR FX camera?.............................................2

3 How do I set up my FLIR FX camera? .....................................................3

4 What are the parts of my FLIR FX camera? .............................................5

4.1 Front ........................................................................................5

4.2 Top ..........................................................................................5

4.3 Left..........................................................................................6

4.4 Right........................................................................................6

4.5 Back ........................................................................................7

4.6 Indoor Stand..............................................................................7

5 How do I activate manual recording? .....................................................8

6 How do I view recordings on my computer?............................................9

7 How do I wall mount my FLIR FX camera? ............................................ 11

8 FLIR FX Specifications .......................................................................13

9 Notices.............................................................................................14

#LX400034; r.16787/16787; en-US v

DRAFT

Lorex Technology FXV101 IP wireless camera User Manual (4)

DRAFT

Safety Precautions

1

Camera is not weatherproof. Use the appropriate outdoor accessory if using the cam-

era outdoors or where it will be exposed to moisture.

Make sure that outdoor power outlets and cable connections are properly sheltered

from the elements.

Do not use the camera below 32°F / 0°C or above 104°F / 40°C.

Only use the camera with approved FLIR accessories.

Do not use or install the camera near a radiator or heat source.

Do not cover the camera with a towel or blanket.

Do not point the camera directly towards the sun or a source of intense light.

Aiming the camera through a window will cause the nighttime LEDs to reflect off of the

glass, causing a bright spot in the image.

Keep the cables at least 3ft / 1m away from baby cribs and out of reach of children and

infants.

Use the included cable clips to help keep cables away from children.

Do not disassemble the product. No user serviceable parts inside.

Do not disassemble or do a modification to the battery. The battery contains safety and

protection devices which, if damage occurs, may cause the battery to become hot, or

cause an explosion or an ignition.

If you are not using the product for a prolonged time, charge the battery every 6 months

to keep the battery in working condition.

Dispose or recycle the product and batteries in accordance with local laws, which may

vary by location.

If using an accessory with replaceable batteries, only use replacement batteries speci-

fied by FLIR. Use of other types of batteries may damage the product.

The camera makes a clicking noise when changing between day and night modes. This

clicking is normal and indicates that the camera filter is working.

Do not connect more than one USB cable to the product at once.

#LX400034; r.16787/16787; en-US 1

Lorex Technology FXV101 IP wireless camera User Manual (5)

DRAFT

What is included with my FLIR FX

camera?

2

The standard model FXV101–H comes with the following components:

Camera with indoor stand.

microUSB cable.

(Video) Lorex Fusion 4K IP NVR Security Camera System Review - Features, Unboxing, Setup, Video & Audio

8GB microSD card pre-installed in the camera.

Power adapter.

Power points for European and UK use.

Mounting screws and drywall anchors.

Extra mounting / camera ID plate for convenience.

Quick start guide and safety information.

Note

Other models or configurations may come with slightly different components or accessories.

#LX400034; r.16787/16787; en-US 2

Lorex Technology FXV101 IP wireless camera User Manual (6)

DRAFT

How do I set up my FLIR FX

camera?

3

1. Connect the included USB cable to the power adapter. Connect the other end of the

USB cable to the camera and connect the power adapter to a power outlet.

Note

The REC LED will glow orange to indicate the camera is charging. It will glow green when the

camera is finished charging. The battery will take 6 hours to fully charge.

You can connect the power adapter to either the USB cable on the camera or camera stand. Do

not connect a USB cable to both the camera and stand at the same time.

2. Press the power button on the camera. The camera will start up and the Direct Mode

LED will glow orange.

#LX400034; r.16787/16787; en-US 3

Lorex Technology FXV101 IP wireless camera User Manual (7)

How do I set up my FLIR FX camera?

DRAFT

3

3. Download the FLIR FX app from the App Store or Google Play Store. Start up the app

and follow the start up wizard in the app to connect to the camera.

#LX400034; r.16787/16787; en-US 4

Lorex Technology FXV101 IP wireless camera User Manual (8)

DRAFT

What are the parts of my FLIR FX

camera?

4

4.1 Front

1. Infrared night vision LEDs: Allows the camera to see up to Xft / Xm in total darkness.

2. Lens: Provides a wide-angle 160 degree field of view.

3. Microphone: Allows you to hear the area around the camera.

4. Speaker: Allows you to talk through your camera from your mobile device using 2-

way-talk.

4.2 Top

1. REC button / status LED: Press to start / stop manual recording.

LED colors:

Flashing red: Camera is recording.

Solid orange: Camera is charging.

Solid green: Camera is fully charged.

#LX400034; r.16787/16787; en-US 5

Lorex Technology FXV101 IP wireless camera User Manual (9)

What are the parts of my FLIR FX camera?

DRAFT

4

4.3 Left

1. WPS button: Used to connect the camera to a WPS-compatible router (not included).

Press the WPS button on the router and then press the WPS button on the camera to

make the connection.

2. Power/WiFi button: Press to turn the camera on. Press to switch the camera between

hotspot mode and WiFi mode. Press and hold to turn off the camera.

3. Accessory connector: Allows the camera to slide into compatible accessories.

4.4 Right

1. microSD slot: Insert a microSDHC, or microSDXC card between 8GB and 64GB for

recording on the camera. It is recommended to use microSD class 10 or higher cards.

2. microUSB port: Connect a microUSB cable to the camera for charging or to save vid-

eo file from the camera to a PC or Mac.

Note

While the camera is connected to a computer, you will not be able to connect to it on a mobile device.

Do not connect a USB cable to both the camera and stand at the same time.

#LX400034; r.16787/16787; en-US 6

Lorex Technology FXV101 IP wireless camera User Manual (10)

What are the parts of my FLIR FX camera?

DRAFT

4

4.5 Back

1. Direct mode LED: Indicates the camera is in Direct (AP) mode. When the camera is

in Direct mode, you can connect to the WiFi hotspot created by the camera to connect

to it in areas without access to wireless.

(Video) Lorex 2K Wireless Camera System [Review + Mini-Guide]

2. Cloud mode LED: Glows solid green to indicate the camera is connected to a WiFi

network, allows you to connect to the camera from anywhere. Flashing indicates the

camera is connecting to a WiFi network.

3. Temperature/humidity sensor (built-in): Senses the temperature and humidity in

the room.

4. Accelerometer: Senses the motion of the camera.

4.6 Indoor Stand

1. Connect: Allows the stand to connect to the camera.

2. Ball joint: Provides the camera with a flexible range of motion.

3. Expanded battery: Provides extra battery life for the camera.

4. microUSB port: Connect a microUSB cable to the stand for charging the battery in

the camera and stand.

Note

While the camera is connected to a computer, you will not be able to connect to it on a mobile device.

Do not connect a USB cable to both the camera and stand at the same time.

5. Mounting plate: Enables the camera to be mounted to a wall. The mounting plate can

be removed from the camera. The camera comes with an additional mounting plate,

so you can keep a permanent mounting position while still having the ability to move

the camera around.

6. Device ID label: Contains the Device ID and QR code used for initial setup using the

mobile app.

#LX400034; r.16787/16787; en-US 7

Lorex Technology FXV101 IP wireless camera User Manual (11)

DRAFT

How do I activate manual

recording?

5

While the camera is on, press the REC button on the top of the camera. The button will be-

gin flashing red to indicate recording is in progress. Press the REC button again to stop

recording.

#LX400034; r.16787/16787; en-US 8

Lorex Technology FXV101 IP wireless camera User Manual (12)

DRAFT

How do I view recordings on my

computer?

6

The easiest way to view video recordings from your FLIR FX camera on a computer is to

connect the camera directly to the computer using the included microUSB cable. If your

computer has an SD or microSD card reader, you can use it to view the recordings.

Note

This section covers local recordings saved to the camera’s microSD card only. If you have a subscription

plan and have recordings saved in the cloud, you will need to use the FLIR FX app to view those

recordings.

To view video recordings from the camera microSD card on a computer running

Windows:

1. Connect a microUSB cable to the camera and connect the large end to a USB port on

your computer. This puts the camera into USB storage mode.

Note

When the camera is in USB storage mode, you cannot connect to the camera using the apps on a

smartphone or tablet. You must disconnect the camera from the computer in order to allow

connectivity.

2. An AutoPlay window appears. Click Open folder to view files.

Note

If AutoPlay does not appear, click on My Computer and browse to the SD card. If the SD card does

not appear, disconnect and reconnect the USB cable to the computer.

#LX400034; r.16787/16787; en-US 9

Lorex Technology FXV101 IP wireless camera User Manual (13)

How do I view recordings on my computer?

DRAFT

6

3. The camera saves videos and images onto the microSD card in folders based on the

type of recording. For example, the USER folder contains manual video recordings.

Double-click on the folders to access the video files.

Note

The camera saves video files to the microSD card in .mp4 format and saves images in .jpg format.

You can view .mp4 videos using Windows Media Player or VLC Player.

To view video recordings from the camera microSD card on a computer running

Mac OSX:

1. Connect a microUSB cable to the camera and connect the large end to a USB port on

your computer. This puts the camera into USB storage mode.

Note

When the camera is in USB storage mode, you cannot connect to the camera using the apps on a

smartphone or tablet. You must disconnect the camera from the computer in order to allow

connectivity.

2. The camera’s microSD card will show up on the desktop ( ). Double-click SD to

open.

3. The camera saves videos and images onto the microSD card in folders based on the

type of recording. For example, the USER folder contains manual video recordings.

Double-click on the folders to access the video files.

Note

The camera saves video files to the microSD card in .mp4 format and saves images in .jpg format.

(Video) Night Owl Outdoor Wireless Camera Setup/Installation

You can view .mp4 videos using Quick Time Player or VLC Player.

#LX400034; r.16787/16787; en-US 10

Lorex Technology FXV101 IP wireless camera User Manual (14)

DRAFT

How do I wall mount my FLIR FX

camera?

7

The indoor stand allows you to simply mount the camera to a wall. An extra mounting plate

is provided so you can have a permanent mounting place for the camera while still being

able to move the camera around when needed.

Note

Before mounting the camera, determine the best mounting position to get a view of the area you want.

Ensure the power cable is long enough to power the camera.

CAUTION

Keep the cables at least 3ft / 1m away from baby cribs and out of reach of children and infants. Use the in-

cluded cable clips to help manage the cables.

To wall mount the FLIR FX:

1. Using a coin, turn the mounting plate on the bottom of the indoor stand counter-clock-

wise to remove it from the base.

#LX400034; r.16787/16787; en-US 11

Lorex Technology FXV101 IP wireless camera User Manual (15)

How do I wall mount my FLIR FX camera?

DRAFT

7

2. Use a pencil to mark holes for the mounting screws.

3. Drill holes where marked using a drill.

4. Tap the included drywall anchors into the holes with a hammer.

5. Attach the mounting plate to the wall using the included mounting screws.

6. Attach the camera stand to the mounting plate. Make sure the locking mechanism on

the plate lines up with the indent in the camera stand. Twist the camera stand clock-

wise to secure it to the mounting plate.

#LX400034; r.16787/16787; en-US 12

Lorex Technology FXV101 IP wireless camera User Manual (16)

Lorex Technology FXV101 IP wireless camera User Manual (17)

DRAFT

Notices

9

FCC Notice: This device complies with Part 15, subpart C, of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference that may

cause undesired operation.

The manufacturer is not responsible for any radio or TV interference caused by unauthor-

ized modifications to this equipment. Such modifications could void the user’s authority to

operate the equipment. However, it is imperative that the user follows the guidelines in this

manual to avoid improper usage which may result in damage to the unit, electrical shock

and fire hazard injury.

Changes or modifications made to this equipment not expressly approved by FLIR Sys-

tems, Inc. may void the FCC authorization to operate this equipment.

Radio Frequency Exposure: The radiated output power of the device is below the FCC/

IC radio frequency exposure limits. Nevertheless, the device shall be used in such a man-

ner that the potential for human contact during normal operation is minimized.

FCC/IC: This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry

Canada. Operation is subject to the following two conditions: 1. This device may not cause

harmful interference, and 2. This device must accept any interference received, including

interference that may cause undesired operation.

Exposition aux radiofréquences : La puissance de sortie rayonnée de l'appareil est in-

férieure aux limites d'exposition de radiofréquences de la FCC/IC. Néanmoins, le dispositif

doit être utilisé de telle manière que le niveau de contact avec un être humain soit réduit

au minimum pendant une utilisation normale.

FCC/IC: Ce dispositif est conforme à la section 15 des réglementations de la FCC et à la

norme RSS-210 d'Industrie Canada. Son fonctionnement est soumis aux deux conditions

suivantes : 1. Ce dispositif ne doit pas causer d'interférences nuisibles, et 2. Ce dispositif

doit accepter toute interférence reçue, y compris les interférences qui peuvent provoquer

un fonctionnement indésirable.

CE: This device complies with the essential requirements of the R&TTE Directive 1999/5/

EC. The following test methods have been applied in order to prove presumption of con-

formity with the essential requirements of the R&TTE Directive:

EMI/EMC Directive 2004/108/EC - Electromagnetic Compatibility

WEEE Directive 2012/19/EU - Waste Electrical and Electronic Equipment

LVD Directive 2006/95/EC - Low Voltage Directive

Battery Directive 2006/66/EC - Batteries and accumulators and waste batteries and

accumulators

ErP Directive 2009/125/EC - on the Eco-Design requirements of Energy-related

Products

RoHS2 Directive 2011/65/EC - Restriction on the use of certain Hazardous Substances

Disposal: As with most electronic products, this equipment must be disposed of in an en-

vironmentally friendly way, and in accordance with existing regulations for electronic waste.

Please contact your FLIR Systems, Inc. representative for more details.

#LX400034; r.16787/16787; en-US 14

IC: This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

(Video) Top 4 Wireless Battery Powered Security Cameras 2022.

IC: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux

appareils radio exempts de licence. L'exploitation est autorisée aux deux

conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)

l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si

le brouillage est susceptible d'en compromettre le fonctionnement.

Lorex Technology FXV101 IP wireless camera User Manual (18)

Notices

DRAFT

9

Audio Recording: Audio recording without consent is illegal in certain jurisdictions. FLIR

Systems, Inc. assumes no liability for use of its products that does not confirm with local

laws.

Need Help

Visit www.flir.com/fx to access the FLIR FX knowledgebase or contact technical support

or customer service.

#LX400034; r.16787/16787; en-US 15

Federal Communication Commission

Interference Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Federal Communication Commission (FCC) Radiation Exposure

Statement

This EUT is compliance with SAR for general population/uncontrolled

exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance

with the measurement methods and procedures specified in OET Bulletin 65

Supplement C.

This device and its antenna(s) must not be co-located or operating in

conjunction with any other antenna or transmitter.

IC Radiation Exposure Statement

This EUT is compliance with SAR for general population/uncontrolled

exposure limits in IC RSS-102 and had been tested in accordance with the

measurement methods and procedures specified in IEEE 1528.

DRAFT

DRAFT

Lorex Technology FXV101 IP wireless camera User Manual (19)

last page

DRAFT

Publ. No.: LX400034

Commit: 16787

Head: 16787

Language: en-US

Modified: 2014-08-29

Formatted: 2014-08-29

Corporate Headquarters

FLIR Systems, Inc.

27700 SW Parkway Ave.

Wilsonville, OR 97070

USA

Telephone: +1-503-498-3547

Website

http://www.flir.com

Customer support

http://support.flir.com

Copyright

© 2014, FLIR Systems, Inc. All rights reserved worldwide.

Disclaimer

Specifications subject to change without further notice. Models and accessories subject to regional market considerations. License procedures may apply. Products

described herein may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions.

(Video) Best Home Security Cameras 2022 - Outdoor, Indoor, Battery, Wired, NVR

Videos

1. How To Install a Wireless Surveillance Security Camera System Canavis
(StatUpBox)
2. Flir Fx Camera FXV101-H wifi password problems
(ImJustAsBad)
3. 2022 Update BEST 4K PoE Security Camera: $1100 vs $110 Motorized Zoom Cameras.
(The Hook Up)
4. Security Cameras Simplified: Wired vs Wireless
(Smart Home Solver)
5. 5 Best Outdoor Security Cameras You Should Buy In 2022
(BEST GADGET)
6. How to setup the FLIR Secure WiFi Security Camera using the FLIR Secure App
(Lorex Technology Inc)

You might also like

Latest Posts

Article information

Author: Pres. Carey Rath

Last Updated: 09/10/2022

Views: 5307

Rating: 4 / 5 (41 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Pres. Carey Rath

Birthday: 1997-03-06

Address: 14955 Ledner Trail, East Rodrickfort, NE 85127-8369

Phone: +18682428114917

Job: National Technology Representative

Hobby: Sand art, Drama, Web surfing, Cycling, Brazilian jiu-jitsu, Leather crafting, Creative writing

Introduction: My name is Pres. Carey Rath, I am a faithful, funny, vast, joyous, lively, brave, glamorous person who loves writing and wants to share my knowledge and understanding with you.